In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects"
Why It Matters
Analysis dossierWhy It Matters
In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
High
Unknown
Unknown
Risk basis: SOC ecosystem technology relevance; HIGH severity; No confirmed exploitation signal in current enrichment; Source severity; no confirmed exploitation signal
Affected Products & Remediation
1 source-backed product- linux linux kernel · >= 5.14 < 6.1.164; >= 6.2 < 6.6.118; >= 6.7 < 6.12.60; >= 6.13 < 6.17.10; 6.18 · NVD CPE · Source
Vendor or catalog guidance (source)
Not provided by source
Known exploitation (source facts)
Only what a source states. Unknown means no source has said either way; it is not "not exploited".
- CISA KEV
- Unknown
- Exploited (source statement)
- Unknown
- Publicly disclosed (source)
- Unknown
Suggested hunting (rule-based inference)
SecOps Signal recommendation (rule-based inference). These steps are hunting hypotheses from the vulnerability class; they do not state or imply that exploitation occurred here or anywhere.
Matched local-access-review (CVSS AV:L, CVSS PR:L)
Exposure
- Identify hosts reporting this CVE, prioritising shared or multi-user systems.Telemetry: DeviceTvmSoftwareVulnerabilities · A local, low-privilege vector matters most where untrusted users can run code. · Rule local-access-review
Exploitation evidence
- Review source-stated impact and relevant application errors on affected hosts; local access alone does not establish privilege escalation.Telemetry: DeviceProcessEvents · The vector establishes local access and low privileges only. Confirm the impact from the advisory before choosing a specific hunt. · Rule local-access-review
Response
- Confirm the source-stated update on affected hosts.Telemetry: DeviceTvmSoftwareVulnerabilities · Host inventory can verify remediation. · Rule local-access-review
CISA KEV Record
CISA KEV status was not determined for this record.
Change History & Source Data
— No recorded material change
- CNA / source
- 416baaa9-dc9f-4396-8d5f-8c081fb06d67
- Record status · verification
- UPDATED · NVD API
- CPE
- cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*, cpe:2.3:o:linux:linux_kernel:6.18:rc1:*:*:*:*:*:*, cpe:2.3:o:linux:linux_kernel:6.18:rc2:*:*:*:*:*:*, cpe:2.3:o:linux:linux_kernel:6.18:rc3:*:*:*:*:*:*, cpe:2.3:o:linux:linux_kernel:6.18:rc4:*:*:*:*:*:*, cpe:2.3:o:linux:linux_kernel:6.18:rc5:*:*:*:*:*:*, cpe:2.3:o:linux:linux_kernel:6.18:rc6:*:*:*:*:*:*
Evidence & Provenance
Linked by the query's stored exact CVE association. Review required tables and validation status before use.
DeviceTvmSoftwareVulnerabilities| where CveId == "CVE-2025-40251"| project DeviceId, DeviceName, OSPlatform, OSVersion, SoftwareVendor, SoftwareName, SoftwareVersion, CveId, VulnerabilitySeverityLevel, RecommendedSecurityUpdate, RecommendedSecurityUpdateId| sort by VulnerabilitySeverityLevel descLooking up related community queries…